Following on from the last, rather popular post on Peckham Rye and Hunter’s founders David Walker and Martin Brighty, here are some more insights from the interview:


– When you turn a tie in your hand and it seems to change colour slightly, this is because the light is reflecting off the warp. The warp is one direction of the weaving (the other being weft) of the silk. The warp is subtler and sets the foundation for the tie’s tone. While I have written about warp before (in a piece on Vanner’s) I hadn’t cottoned on to this way of revealing it.
– Woven ties will often fray slightly along the front edge over time. If you run a small flame (from a lighter, say) quickly along that edge, it will burn off the stray threads and not damage the tie. The same can be done with loose threads in the main weave. (This technique is used with manmade fibres in other industries, but only where you want them to melt and so fuse together. Silk will not fuse, just burn off.)

– Hunter’s makes a lot of ties for military units. And so many have been amalgamated recently that new designs are coming though all the time. Usually the designers take the dominant colours of each unit and try to find the best combination of them. There’s only a limited number of colour combinations out there though, plus over time the tone of the colours can change – if units have used cheaper tie companies, often the colour over the years comes to look nothing like the original design. That’s one advantage of a history in the industry – at Holliday & Brown they had swatches going back to the 1920s and earlier. So they could check the original swatch.

– The old hand-worked, shuttle looms could weave greater detail than today’s mechanised ones, though obviously nowhere near the speed. “In that old book we had a swatch of the Bugatti Racing Club, which from memory was a royal-blue ground, with a very thin – like one pixel – stripe of black, four pixels of gold, four of red, back to gold, then the black again. You couldn’t achieve that detail today, those looms don’t exist,” says David.

– Back then England made the bulk of the world’s ties, which explains why Holliday & Brown was making for Bugatti. English salesmen spent their lives travelling the globe – Buster Brown of Holliday & Brown used to spend nine months on the road (six of those in the US), all by train and steamship of course.
– When making bespoke ties, a man’s neck size is as important as his height. A short man with a very thick neck may be more in need of a bespoke tie than one of above-average height. And when tall men do have bespoke made, they need to have a wider blade – usually four inches. Otherwise it will just look too skinny.
Subscribe
Notify of
guest

4 Comments
Oldest
Newest
Inline Feedbacks
View all comments
Anonymous

Great shop!

I’ll definitely visit it next time I’m in London.

Thanks for the post Simon.

Best regards,
One of your readers from Denmark

Anonymous

“Woven ties will often fray slightly along the front edge over time. If you run a small flame (from a lighter, say) quickly along that edge, it will burn off the stray threads and not damage the tie.”

I have this issue with a couple of ties but quite frankly the prospect sounds terrifying and I’m afraid to try!

Anonymous

Following my last comment, above, I finally plucked up the courage to try the burning technique and am pleased to say it has been a roaring success – my frayed ties have been restored to their former glory. Don’t be afraid to be bold with the flame.