Anonymous: Do you prefer adjustable metal tabs or adjustable buttons on your suit pants? Is one more formal than the other? Also, I assume your suit pants do not have belt loops…correct?

I’ve had a few such questions over the past few months, so let’s try and cover all the bases at once.

I always wear ‘metal tabs’ (side adjusters, side straps, strap and buckle) with my suits and similarly formal odd trousers. And I prefer belt loops with my casual trousers (chinos, jeans, cords).

With formal trousers, belts and therefore belt loops should be avoided for several reasons. They detract from the formality of the suit; they interrupt its clean, well-tailored lines; they are uncomfortable on thinner, worsted cloths (would you wear a belt with pyjamas?); and when cinched tight, they buckle the trouser waist, creating an ugly bunching.

So no belt loops. Why not tabs with buttons? Because they tighten elastic inside the waistband all the way around the back, creating similar bunching. At their tightest, the look is not that far off the elasticated waist of tracksuit bottoms. Side tabs, even when highly cinched, restrict any bunching to a couple of inches on either side. Plus they offer a continuous range of settings – buttons are discrete.

And why not braces? Well, I can see their virtues and I’ve tried them consistently on one suit, but they are not for me. Yes, the line of the trouser is cleaner and no shirting is exposed below the jacket’s waist button. But I spend some time every day in just trousers, and the high rise then looks unstylish and frankly unflattering. I also find the comfort of greater room in the waist is outweighed by the discomfort of having barathea wrapped around my shoulders.

By the way, side straps should be positioned on the waistband seam, not the waistband itself. This makes them more comfortable and, if worn at the hips as I do, adds an extra inch to the rise. The waistband is amply hidden when wearing a waistcoat.

I enthusiastically recommend side straps, particularly if you currently have belt loops on your suit trousers. Belt loops can easily be removed by a tailor, and side straps can be made out of the turn-up on the inside of the trouser leg, if enough excess has been left.

And then why belt loops on casual trousers? Because side straps don’t work as well on very heavy cloths, and their weight makes slippage less of an issue. Plus, I like belts. They are another opportunity to wear beautiful, hand-stitched leather and to accessorise effectively. A good belt can add colour in a way that would be garish in leather anywhere else.

[Pictured: Charcoal suit from Toby Luper, with side straps on the waist seam]
Subscribe
Notify of
guest

42 Comments
Oldest
Newest
Inline Feedbacks
View all comments
Anonymous

Could you, perhaps, recommend a couple of lovely belts/belt makers?

HNY.

Aree

Simon

I agree whole heartedly on your comments regarding bunching when wearing belts.

I’ve never been one for braces; even when worn under a jacket they don’t look very modern and remind me too much of Gordon Geko from Wall-Street.

I wat to buy a pair of trousers with metal side adjusters and would like to know if they will be suffice in not wearing a belt?

I’ve read men complain that trousers still droop in the middle with adjusters?

Keep up the good work.

Aree

Anonymous

Dear Mr Crompton,
I share your views about the bits on the side, although I have never heard them given such an elaborate if accurate label as “side adjusters”!
Here’s a thing: I recently had a pair of trousers made here in the mid-east, and the tailor simply cannot find suitable buckles. So I now have the button option, but contra your reference, there is no elastic or anything like that — it is the same as the metal buckle kind, but limited to the discrete spacing that the buttons allow. Seems to work satisfactorily — I can live with a bunch of ~ 1/4″ on a side, which would be there with buckles as well.
I have been having things made for many years, but never noticed about the vertical positioning point you made. I may well try that next.
Excellent web site. Thanks & regards.

[…] On this page they discuss the style pictured and one that has an actual belt buckle. All three of these options require one waist adjuster on each side of the pant. http://www.permanentstyle.com/2010/12/reader-question-trouser-waists.html#.UoeAjuJCyz4 […]

Edmund

Hi, I do have a belly and wear my work pants below my belly. However, it keeps falling off at the back of my pants even though it is tailored. Is there a way to actually hold up my pants besides wearing braces? Or is there any suggestions I should voice out to my tailor.

max

Where can I buy adjustable metal tabs for trousers in uk?

Alec

Hi Simon,

I’m in the process of buying my first made-to-measure suit and have elected to go with Gieves & Hawkes. This will be my first time wearing trousers with side adjusters and was unsure whether to go for buttons or metal tabs. I remembered this page on your site so have held off making a decision to check back on the above – and this reminded me about your point re. the adjusters being on the seam. The adjusters on their M2M trousers are on the waistband and I’m not sure if this can be changed as M2M draws upon one or two house blocks – will they still have the right effect? I take in board the above point re. metal tabs over buttons but just wondering how significant a difference not being positioned on the seam will make if they can’t be changed.

Many thanks.

Alec

Thanks Simon.

Another quick question – are there any ‘rules’ re. rear pockets on suit trousers? Is there a reason why many only offer a pocket on the right side, whilst a few (mostly the Italian designers it seems to me) have pockets on the right and left.

Thanks again.

Jason

Hi,
I have a customer who prefers strap/buckle but sits down all day in them, causing creasing and rolling over on the front waistband. Other than reinforcing the problem area (which has been tried with moderate success), do you have any ideas as to how to minimize this please?

leo bradley

can you please tell me where i can find mens suits with a self adjusting waist band

G

Hi Simon,

Do you happen to know any RTW brands which offer side adjusters?

MJS

I used to have pants with zipper on sides of waistband and it looked classic and worked just fine! Is it possible to order pants with zippers on the sides?

ALejandro

Hello,

I need urgently to by buckles for side tab adjusters for my trousers. Were can I find this buckles? I need high quality ones. Thank you!

ezequiel

hi simon,

i have two flannel trousers in the works.

regarding the last paragraph, is 360 grams too heavy for side adjusters?

i like them from a style perspective but now i’m curious about their functionality too in this case.

ezequiel

Stuart

Hi Simon, late but related question, when going for side tab adjusters would you suggest the extension waistband have a hook-and-bar or button closure? The former seems like a cleaner option but I’ve heard the button is more secure. Thanks

Stuart

Thanks again Simon. Can I ask which style you tend to prefer for this detail?

Gerald

My cleaners recently lost the trouser side adjuster metal buckle to my favorite suit pants. Do you know where I can order a replacement pair? I’ve tried searching the internet but couldn’t find the right ones. Thanks

Christos

Hi Simon,

please tell me if i understood you rigth here.

I am talking about trousers worn at the hips.

You place the side straps on the waistband seam and the waistband seam itself is actually at the level (higher) were normally the waistband is located on trousers with belt loops or on trousers with the side straps on the waistband, rigth?

So like this your waistband actually sitts higher than it ‘should’, adding some visual rise?
Has this ‘visual’ rise any practicality on comfort by embracing a bit more ones waist?
It seems so to me.

John

Hi Simon,

when you mention high-waisted trousers you also usually speak of the “necessity” of wearing such trousers with braces. But I’ve always thought natural-waisted trousers could easily be worn also with side adjusters, couldn’t they?

In such case, should side straps be placed on the waistband or on its seam? Despite what you have stated in this article, it surprises me that even bespoke tailors place them on the waistband (e.g. your charcoal suit from Sartoria Vestrucci).

Thank you!

J.

George

Simon, I am considering having belt loops removed on some pants and, instead, having side tabs installed. But I have noticed that my pants with side tabs at manufacture have an extended waistband. However, an extended waistband would not be possible on pants that originally had belt loops.

My question is what are your thoughts on side-tabbed pants without extended waistbands? Would side tabs with the standard waistband still look fine?

I am off by about a decade in my comment here. But thank you!

George

Thank you so much, Simon. These pants have about 4–5 cm width of material (going around the circumference) on the turn-up on the inside of the trouser leg. Do you think that’s enough? I was hoping to consult a good tailor about that.

Victor

How much room should be given in the waist if adjusters are added? Should cinching bespoke trousers have slight bunching fabric?

Lindsay McKee

I decided to dare to venture out with my suit, minus the braces, proving the fit.
I had them already adjusted in a little tighter by the tailor but maybe not enough, even after I adjusted the side tabs.
They were just OK but I’d prefer them higher-up on my waist.. definitely more comfortable. I can adjust my braces to accommodate that somewhat.
This leaves me with two options:- braces or belts.
In my heart of hearts,I also love my belts but my braces also. The trousers hang better.

What’s your favourite Simon,belts, braces or side Adjusters?
On their own, not for me… with braces- yes.
All about experimenting!!

Lindsay McKee

Thanks for that.