The Gieves travel blazer is finished and has turned out wonderfully well.

First the fit, for that is the most important thing after all. After three fittings everything on the jacket is perfect, from the shape through the waist, to the sleeve length, to the drape down the back. It’s amazing how many tailors refuse to get the sleeve length right – Kathryn Sargent joins Rubinacci on a very short list.

Kathryn also found just the right compromise on the back, by stretching the cloth slightly over my shoulder blades. We had a little more trouble with the trousers, which took all three fittings to get a nice clean front with no straining below the waistband. Then again, that’s never easy to achieve without pleats.

The style of the jacket overall is a structured one, with decent padding to the shoulder and a strong chest. But neither is as great as the Huntsman tweed jacket, and probably more akin to the double-breasted from Henry Poole. Overall it’s a very nice, English-looking jacket with just enough softness in the hopsack cloth to stop it looking stiff.


The interchangeable buttons on the cuff were achieved in the end with a strip of cloth that attaches to the jacket with poppers. Once secured in this way, the four buttons can be inserted through their respective buttonholes. The buttons on the front of the jacket are secured by metal rings, not unlike key rings, which are then covered by a placket on the inside. These are gold-plated buttons engraved with the crest of my Oxford college, Trinity. The alternative set will be brown horn.


The nice thing about patch, bellows pockets and swelled edges is that the handwork on the inside of the jacket is brought outside, without ostentation. I particularly like how the outbreast pocket looks with handkerchief stuffed in, and the feeling of stuffing the hip pockets – whether with hands or notepad.

Gieves sews a large, branded label into the right side of the chest, above the inbreast pocket, as well as the more discreet label with the customer’s details inside that pocket. I wouldn’t have opted for that had I known, but when this is the only fault you can find with a jacket and trousers, someone has done very well.


For more photos, see Andy Barnham.com. For previous installments in the Gieves series on Permanent Style, please use the search function.
Subscribe
Notify of
guest

21 Comments
Oldest
Newest
Inline Feedbacks
View all comments
coldfire

Hi Simon, this looks like a very fine jacket. Extremely interested in the interchangable buttons idea, I have a go to nazy blazer that I would love to apply this idea to.
The sleeve buttons seem straight forward, I can use the scraps from when I shoertened the sleeve length. The front buttons are the trouble, I would love to hear more about their attachment mechanism. Unfortunately a google search has been fruitless!

Anonymous

I couldn’t agree more regarding the reluctance of tailors to get the sleeve lengths perfect. Their body language and tone will betray their belief that it is the customer who is being difficult despite the evidence in front of them.

One of the sales guys downstairs in Paul Smith (Covent Garden branch) once told me that he would usually charge to re-adjust the sleeve length even though one sleeve was clearly too long (my right shoulder drops). This occured after I had paid for the sleeve alterations (about £40 from memory) that this same guy had incorrectly measured and pinned!

For those in London, I have found Georgie at The London Fashion Workrooms on Parker Street WC2 to be fastidous about sleeve lengths and able to keep obsessives like me happy.

Sinatra's Shadow

Extremely nice. Are G&H planning to make this part of their permanent range?

Just a thought, but might it not have been better for the cuff buttons to have two sets of holes in each side of the cuff and then insert the buttons (on the tape) from the inside of the sleeve? I have a dress shirt from Brooks Brothers that operates in this way, to allow the option of buttons or studs. It seems to me that poppers might come undone when not required.

Richard

If I understand rightly, it would be that the cuffs of the jacket had buttonholes in both sides of the opening. Then you would have a strip of fabric with buttons attached, which you would place inside the sleeve, and pass the buttons through both sets of holes, thus holding the cuff together and the strip in place in one go. An elegant solution but not obviously better in any way.

Sinatra's Shadow

Richard – you correctly describe what I was intending. The only reason it might be better is if the poppers had a habit of becoming undone when not required. If this does not happen in reality, then this is obviously not an improvement.

Andrew

Simon,

This jacket turned out wonderful. I am a big blazer fan. Can you explain in greater detail why you chose hopsack? I thought it was more of a spring/summer fabric? Do you think it can be worn all year?

Anonymous

Simon,

Could you please elaborate on what you mean by tailors refusing to get the sleeve length, right? Is there a disagreement about where the sleeve *should* reach or is there some other subjective disagreement between tailor and client? Many thanks.

Anonymous

Simon,
I intend to get a jacket for travelling; a bit by plane but mostly by car in the tropical country where I work. Weather can be sometimes dusty sometimes humid but always hot.
I was wondering if the cut made any difference in comfort; would an A&S drape cut with its high armholes be a bit stickier around the armpits than a more standard saville row cut?
Your blog is an inspiration. Thank you.

Dieter

Dear Simon,

I am wondering if a corduroy jacket will work as a travel jacket?

Would like to get a bespoke corduroy jacket as you mentioned as part of a capsule wardrobe, but in the configuration of your Gieves & Hawkes travle suit jacket.
I could not find any pictures of this kind of a jacket on the web. Am I running in a wrong direction?

Kind regards,
Dieter

Jay

Hi Simon,

How has your experience with interchangeable buttons been over the years? Have/would you commission another piece with such a feature? I find the idea of this versatility terribly attractive.

I am strongly considering interchangeable buttons in a 13-14oz high twist navy SB single button suit. In addition to your jacket’s method, I found a couple of other interesting takes. I am sharing the links because pictures describe these methods better than words:

http://www.voxsartoria.com/post/63093788038/board-meeting-friday-a-transitional-season
https://www.styleforum.net/threads/the-swissarmysuit%E2%84%A2-a-sartorial-strip-tease.111076/page-12

https://grahambrownebespoke.wordpress.com/2013/12/18/interchangeable-buttons/
I can probably have a craftsperson make similar hardware with a much shorter stem.

I was also considering stitching the buttons to figure of 8 metal loops and securing each button to spring clips running on a fine chain. Of course, one can possibly engineer better solutions.

What is your advice on the matter?

Oskar

Hello Simon, six years later this jacket looks somewhat unfamiliar on you given your moves towards softer odd jackets since then.. But sticking with it, have you come across or know of craftsmen who make custom blazer buttons? I assume Trinity had ready sets of buttons available, but for less popular designs an individual order would be needed. Any suggestions? Thanks much

Lindsay Eric McKee

Hi Simon, Can you tell me what Cloth Merchant & Bunch Name / Number the gray trousers for the beautiful Lapiz Blue Linen jacket came from please?
Thanks
Lindsay

Edward

Hi Simon.

I know this is a really long time ago post, but I’ve been intrigued by this interchangeable button idea for years and would like to use it on my next bespoke suit.

I tried searching for information about it, but you don’t seem to have mentioned it again after this post. I would like to ask you how you feel about the interchangeable button idea now, 11 years after you got this suit?

The structure of the cuff seems easy to understand, but I don’t quite know what the structure of the buttons on the front is, could you please elaborate a little more?

Thank you.