Introducing: PS Oxford fabric

Share
Wednesday, May 9th 2018
||- Begin Content -||

I’ve always found that an oxford shirt fills a very specific gap in my wardrobe.

Smart enough for almost any sports jacket - from cashmere to corduroy - it is also the perfect partner for jeans.

It might bridge formal and casual perhaps better than any other shirting. Chambrays are usually more refined - and while I love denim shirts, I wouldn’t wear them with jeans.

The problem is, oxfords are hard to get bespoke.

Most bunches offered to bespoke customers only have smooth, fine oxfords, aimed at a business customer to wear with a worsted suit or jacket.

Although these have an oxford weave, the fibre and yarn are such that they have none of the nubby, robust texture of a traditional oxford.

So I decided to work with Italian mill Canclini to make one.

The things that set apart a traditional oxford fabric, such as those originally used by Brooks Brothers, are generally a heavier weight, a thicker yarn, and a subtle variation in the blue and white yarns that leads to a varied, natural appearance.

The weight of good cotton is what makes the shirt so comfortable, soften with age, and feel lived-in and personal.

The thicker yarn makes it more casual - much more suited to denim and flannel than to worsted.

And the varied texture gives it a similar appeal to slubby linen or tweeds.

That last point is perhaps what is most obviously missing in modern, dressy oxfords (but you do get in indigo-dyed linens, for example).

The nubby texture comes from using a short-staple cotton. The short fibres mean the yarn naturally varies in width along its length, and as it weaves in and out, this variation creates the characteristic texture.

So where a dress shirt might use something like a two-ply 100-count yarn, the weft of our oxford fabric is single-ply 10-count. Still a lovely feeling cotton, but nowhere near as fine.

In the warp we have done something slightly different.

Here a traditional oxford would normally use another, thick single-ply yarn. But instead, we have used two fine yarns (both of them two-ply 90-count).

Having two in the warp means it has a similar thickness to the weft, but their higher thread count gives the fabric a nicer feeling overall.

The final cloth still has that traditional texture, but avoids some of the downsides of short-staple cotton, such as pilling.

Ready-to-wear shirts generally come much closer to traditional oxfords than those you can get for bespoke.

But even then, they mostly use two-ply yarns in both warp and weft. One of the nicest I’ve seen, for example, is from Mercer & Sons in the US, which uses two-ply for both.

The combination of single-ply in the weft and finer two-ply in the warp seems, from the examples I’ve seen with Canclini, to give the best combination of authentic texture and performance. 

The shirt I am wearing in these images has been worn and washed 12 times.

During that time it has got softer and nicer, and at this point already feels like an old friend.

Part of the attraction of a traditional oxford is of course how it ages, and I look forward to it only getting better over the years.

The shirt has also perfectly filled that gap in my wardrobe - the perfect thing to wear with jeans and a sports jacket (or, as above, a suede cardigan).

I already have a second in the works.

I am really proud to offer this oxford fabric to readers - woven by Canclini and exclusive to Permanent Style.  

As I know there will be a lot of interest among readers in having it for bespoke, initially we are only offering cut lengths and not shirts.

I wanted to give everyone as much chance as possible to get the fabric, and we will produce some shirts later in the year.

As with Everyday Denim, the fabric is pre-cut into 2m lengths, which should be enough for most guys (roughly, anyone 6’3’’ and under).

It is being shipped from England (we’re trying to make the buying experience consistent) so if anyone wants to send it to Luca Avitabile or another shirtmaker, they will need to put them as the delivery address - and let them know it’s coming.

It is only available in the classic sky blue, and costs £55 (plus VAT). Do feel free to buy more than one length, but we’ll put on a cap of five per person, to try and give everyone a chance.

Technical details:

  • Yarn: 1/10 x 2/90
  • Composition: 100% cotton
  • Weight: 250g/metre [dress fabrics might be around 200g/m]
  • Cut length: 2m x 1.5m
  • Fabric is pre-washed and should not shrink

Available now on the shop site, here. As per usual, click on the images to enlarge.

Also shown in the photos:

 

  • Bespoke Levi's jeans
  • Elia Caliendo bespoke jacket in Permanent Style Tweed
  • Connolly suede cardigan

Photography: Jamie Ferguson @jkf_man. Taken from an upcoming piece on my bespoke Levi's, shot in their lovely new atelier. Thank you Lizzie and the whole Levi's team.

Subscribe
Notify of
guest

143 Comments
Oldest
Newest
Inline Feedbacks
View all comments
O

Excellent. Any plans for white?

Chancellor

Will add my vote for alternate colours in the future. I have a purple oxford so that I can have a bit more variety with my denim shirt covering off blue.

Mac

Hi Simon
Lovely to see you again the other day, we keep bumping in to each other!

I’ve always avoided oxfords because of the roughness of the fabric against my skin, always preferring finer twill, denim and linen/cotton for my shirts. Wouldn’t chambray fill the wardrobe gap as well as an oxford?

DKP

Simon – was the shirt in these photos made by Luca?

Bamboccio

Interesting that you say that after washing it has become softer.
My oxfords are all hard as cardboard after being washed in London. Tumble drying appears to reverse the process a bit and to bring some softness back.

Pierre

Hello Simon! An OT question, I´ve recently started using my bike back and forth to work. As I often wear suits I find it hard to find a helmet that looks smart with a proper attire. Feels like the general store supply is either skateboard helmets or something you wear during Tour de France. Can you recommend any nice helmets when bicycling? I´ve looked at Carrera´s foldable, any thoughts on that one?

Burt

The Swedes developed “Hövding”, an airbag for cyclists that can almost be worn like a scarf.

Roy Gardner

POC MTB helmets, for example the Tectal in black, might fit the bill.

Harris

Hi Simon,

Two questions:

1. When you had Luca make this shirt for you, do you use his typical fused collar or do you have him make the shirt with an unlined collar like our OCBDs in the States?

2. Are you ever going to do another run of the PS Tweed?

Toby

Dear Simon

There is no such thing as an OCBD with a fused collar. They are normally unlined, so nothing to fuse!! Please be reasonable!!

You say you like Mercer. Read up and see how they are made.

Greg

Hi Simon

So do you now favor fused collars for formal and non-fused collars for informal shirts?

Colin

Great addition to the PS brand. I have never seen a suede cardigan but it works really well, what drew you to that as it’s slightly unusual?

Adam jones

Hit the nail on the head with Bespoke oxfords. I have had a few and whilst I prefer the fit and collars the fabric is always far too fine and formal. Does work with jeans but not as nice dressed down as a RTW cloth. It’s frustrating sometimes that I prefer wearing some of my uniqlo oxfords rather than my bespoke because of the cloth.

Oliver

I remain disappointed, as ever, that you don’t offer your shirting fabric in lengths for people taller than 6’3″.

Somewhat ironic given the intended use for a bespoke garment!

Winot

I am 6’4″ and the Everyday Denim length was fine for me. It might be worth checking with your shirtmaker before giving up on this.

I’ve ordered a length to be made up by Luca. Have never liked Oxford cloths for either casual or business and never been quite sure why. You might be right Simon that they are often neither fish nor fowl. Will be interested to see how this works out.

Richard Jones

Simon, the shirt (only) tucked into jeans is a nice look on you – helped by the fine quality and fit of both.

Anonymous

Congratulations on another great and unique PS product. The single/two ply mix is a point of difference and addresses some of the issues related to the more trad. weave as you rightly point out. Agree that more colours would be good but, for the creative, robust cotton can be bleached and dyed according to want. Kudos also to Luca on such a fine cut of shirt – the collar shape is perfect. Out of interest Simon do you use your pattern for all shirts he cuts or do you vary the cut across cloth type and formality? To Bamboccio – the hardness is due to the high limescale content in UK water (particulatly in the south) -a fabric softener or 2n1 might help alleviate the problem.

A

Well thank´s a lot, you keep taking money out of my pocket! 😉

I´ve made the experience that rougher fabrics actually age with less dignity than finer fabrics, resulting in frayed cuffs which look rather shabby. Or maybe it just shows more?

JB

This cloth looks very interesting indeed, well done!
PS. Let’s not forget many of the OCBD purists wear frayed cuffs and collars with pride.

Jordan Healey

As this is a heavier weight shirting, how does it perform in breathability compared to a dress shirt with finer yarns, but lower gsm ?

It doesn’t get very cold where I live.

Adam

Simon can you advise how one can go about getting this PS tweed cloth you are wearing? Must be a way of getting a few meters done even if you are not planning to reproduce? Thanks

Anonymous

Just a question regarding the gauntlet button. Do you prefer to keep them as with this short or forgo them altogether?

JH

This is great! Have you used the same vintage-inspired MOP buttons on this shirt as feature on the everyday denim shirt?

H

Do you like the fabric of the Drake’s button-down oxfords? I’ve always thought they were the nicest RTW versions, and very good value at 3 for £295.

Incidentally, this seems like a great product – but I’d warn off going for a plain white if you were to produce other colours. Its difficult to wear as an OCBD, because the formality of the colour is greater than the of the material or cut. I think what Drake’s are calling a “blue ticking stripe” would be much more versatile – and after that I would still perhaps put a pink above a white for versatility, although the pink would be very preppy indeed.

Chancellor

I agree about White not being the preferred colour. I’ll add that Inthibk some of the beauty of an Oxford short is in the contrasting colour of the warp and weft yarns. If both are white, that is lost.

Anonymous

Any plans to do a second run of this or another run of the denim?

Mark

I bought one of the Everyday PS/LA denim shirts and I love it. The only issue I have with the cut, and it is a very minor one: but the sleeves and cuffs are narrow (by about 0.5 – 1 cm) (especially in proportion to the chest and shoulders). Everything else is perfect, collar size, sleeve length, chest, shoulders etc. This isn’t about the size of my arms or wrist, but rather the tolerances that I am used to in RTW having worn many shirts of that size.

Shem

Nice shirt in the first picture Simon. It looks very fitted though which brings to the question how much allowance do you usually have in your shirts for chest and waist?

A. Keller

Indeed, and I was going to comment/ask exactly the opposite. For me it looks like a quite relaxed fit, specially in the image showing your back. Would you normally go for a more fitted approach on non-casual shirts? Any blog-post or recommendation about how a shirt should fit?

Adam

Hi Simon

The cloth may be nice enough, but I’m afraid that you’re missing the point, as I think you often do.

Button down Oxford should be slouchy and a bit roomier than most shirts. Look at photos of McQueen and others and see it in its proper context.

Having a fusible collar is just plain wrong.

I may be missing the point here, but why take something qualitative (the cloth) and turn it into something so odd?

Adam

Simon

Sorry if we are going to disagree.

Oxford button downs have always been relaxed and informal. So to get them made to roughly the same pattern as a formal shirt makes little sense.

The collar is traditionally not fused. It is traditionally not even lined at all.

I’m sure you have developed a very nice cloth, and I’m sure it will wear well and soften beautifully over time, and I’m sorry if you don’t like my comments, but you are making a bit of a hybrid in my view and moving the whole simple, classic ethos of the oxford buttondown to something new and not at all in keeping with the history of the garment.

There is a universe of historians on dress out here, so if you come up with something a bit mistaken, please do us the courtesy of gracefully accepting our challenges if we make them.

Sorry.

Martin Thomas

I think Adam makes an interesting point actually.

If a casual shirt is a particular type, why not observe that it might differ from a perceived view? I think to say it fails an interest test is a bit defensive. You should publish more comments like this.

Surely you should welcome opinions from others, even if they don’t accord with your views?

JS

Timeline for finished shirts, Simon?

Rafael Ebron

Cool. I’m buying one for sure. Save me one 🙂 The every day denim shirt has been a good one for me.

Roshan de Jong

Just received my two lengths in the mail, and they are lovely. Exactly the soft, subtle shade of blue I was hoping for, and with a wonderful hand. Thanks!

Martin

Of all the recent collaborations this is the most helpful (for me) and if you should plan for another colour I would sugest grey. A have a very old Ralph Lauren ocbd in grey and never found a similar cloth.

Svein Olav Nyberg

Love your jacket!

Michael

Hi – is there a shirt maker in London that you would recommend to make a more casual shirt in this cloth. One that won’t break the bank? Regards

DKP

Simon would you say this is lighter than a normal Oxford blue? I ask as I’m concerned it might wash me out.

JB

Hi Simon,
Just received my first shirt with shirred/neopolitan shoulder as you have on yours here.
While I like the added comfort and motion, I’m still not sure how I feel about the puffiness that occurs as a result. How do you feel about it? Looks will always be subjective, but in terms of practicality – Does it get in the way under knitwear for instance? haven’t had the time to try it myself.

DKP

Simon – On this, if one were to engage, e.g. Luca to create a shirt, do you think he would be insulted if the client specifically requested that the shoulder not be in the Neapolitan style?

Noel

Hi Simon,

Is it possible to get this cloth at the popup shop ?

Nigel C

I received my PS Oxford button down yesterday from Simone Abbarchi. Cloth and shirt are exactly as I’d hoped. I’m almost wishing for cooler weather so I can wear and enjoy!
Thanks to Simon and Simone! N

noel

Hi Simon,

Is there a reason why then price of the fabric piece is higher at the pop-up shop than online?

Hans

Hi Simon,
I am curious about your second oxford shirt. Is that still button down collar?
Do you wear oxford shirt with tie?

Hans

Thanks.
Why do you want to bespoke the same design shirt in the same fabric? Is there any difference between them?

Z

Received my shirt made bespoke by Luca Avitabile now. Amazing cloth, even better than the denim. Quite expensive, but so good. What will be next?

Z

ah nice. Striped I guess…

Christos

Hi Simon,

i am suffering a little with the idea of making my PS-Oxford-Fabric not as a classical OCBD but instead with a normal collar and no placket.

I am not a real fan of button down colars and plackets but i find the fabric lovely, i have bought 3 lengths.

What are your thoughts on that? Would it be nice with this fabric or rather odd?

Has anyone else reading this post, done his another way then a classic OCBD?

Many thanks!

Christos

Hi Simon,

it does not seem that this fabric has a face?

Martin

I really like the slightly yellow buttons you used for the Everyday denim shirts. Would you use them for this cloth too or is it too light in colour?

P

Hi Simon,

A technical question: is the cloth weight 250g per square or linear metres?

You’ve mentioned elsewhere that UK cloth merchants use the former, while Italian cloth merchants use the later.

Thanks

P

Thanks for the clarification.

I’d be interested I know why it doesn’t matter either way. Is it because (on a 1.5m width cloth) 160g vs 240g is a minor difference in weight?

Thanks

Philipp

Hi Simon,

I´ve ordered the oxford cloth last summer. My tailor made me a wonderfull versatile shirt and I have worn it about 20 times or so by now. I just wanted to thank you very much for your research and your offer. It has become one of my favourite shirts and I love the beautiful light blue colour and the thickness of the cloth.

Philipp

Martins

If you could choose 2 shirts from your offer… which 2 would it be?

Raphael

Hi Simon,

regarding the measurements – Size M – would fit perfect. @the shop-page, it says that the Oxford-shirts shrink (the denims not).
is the shrinking a maybe or do most of the shirts shrink?
If the sleeves really shrink 2cm, the shirt would not fit anymore.
Or should I better go for the light denim? 🙂

Anonymous

Hi Simon, what’s your favourite point length, spread, and tie space measurements for button-down shirts? Thanks! 🙂

Jason

Hi Simon, do you know when the pink oxford cloth (and the chambray) might be available again? Thanks, Jason

Jonathan

Hi Simon,
I am planning to have Drake’s make me a button-down in one of your PS Oxfords. Perhaps a blue for starters. I must say, the cloth looks superb in the photos.
It seems sensible to me to kill off the shrinkage issue before the shirt is made, particularly as, in this case, it will be within my control to do so. I’m sure I read somewhere on the site that washing the bought, cut length a couple of times at 40 does the trick. Is that right? Just wash and hang dry?
Is there anything else I might know? (this will be the first time I have supplied the cloth to the maker)
Thanks as ever, Jonathan

BC

Hi Simon,
How does the PS Oxford cloth compare with something like the Thomas Mason American Oxford fabric? Seems like a similar concept, striking a balance between the best features of a casual Oxford with some features of a luxury fabric.

Martins

Hello! After first meeting couple weeks ago, i finally sent this and striped Oxford cloth to Luca Avitabile to make the shirts. International addresses just gives me headache, so I sent an email explaining it, and asking to send to a correct adress, in case I made mistake entering adress! I hope correcting adress is possible?

Martins

I bought yesterday around midnight, tried my best to enter correct adress, emailed correct adress right after that, just asking to correct it if I made a mistake. So far didn’t get “dispatched” email, so I hope they will check before dispatch… thank you! Let’s just hope I do get a fitting in January instead of another lockdown!

Jonathan

Hi Simon,
May I ask about your experiences with Oxfords and managing pilling? (both PS cloth and generally)
I have a couple of Oxford shirts from well-known makers and both are now pilling/tufting noticeably at the collar. It happened disappointingly quickly on the newer of the two. Admittedly, I am rarely clean shaven, which is no doubt the chief exacerbating factor, but still. Perhaps I just best focus on expanding my shirt collection to reduce the frequency of wear.
Cheers, Jonathan

Joshua George

Going to a made to measure shop today to buy certain casual fabrics for myself to wear with jeans.
The oxfords being offered by them as you have mentioned is fairly sleek and shiny. Do you think because of the casual nature of oxford fabric it could still be worn with jeans even if it is sleek and shiny?
Would linen shirts fill the gap of an oxford and could be worn with jeans? Do you find linen shirts to be that casual?

Joshua George

Ok.
Would a wardrobe consisting of just linen shirts for weekend sounds good to you Simon?

Gary

It’s a nice fabric but with respect it could have looked better with a four finger collar so you get a great roll and a sewn in back pleat which are de rigeur on our made to measure shirts .

John

Hi Simon, when will the cloth be available again? Best j

John

Any update on the availability?

John

Okay, so I guess some supply chain problems? Any indication possible if the cloth is available in the next 4,8 or 12 weeks?

Best
J

John

Hi Simon,

I was wondering if the fabric is still made by Canclini since it does not state Canclini on the product page in the shop. If it is woven by Canclini, do you know in which country the produce it?

Best

J

John

Thank you

Kyle

Hi Simon,
I was wondering if the colour of the fabric faded within the twelve washes. Thanks in advance.

Shem

Hi simons i live in singapore where it is very hot and humid year round. While i love oxfords my drakes oxford is just lying in the wardrobe and unworn for years. Im wondering how can one wesr more oxfords in a humid country? More specifically a design like a uni stripe oxford cannot be replicated in a broadcloth or linen fabric. I would say not even pinpoint oxfords.

Anonymous

Hi Simon – you mentioned in the article that it is hard to find bespoke Oxfords in the quality of fabric you were seeking. Has that changed since you wrote this and wondering if there any good made-to-measure Oxford makers with fabric you’d recommend, beyond this PS fabric of course?

Matt

Simon, I’ve purchased three lengths of the oxford cloth in blue, white, and blue/cream stripe. I’m about to have them made up. With respect to shrinkage, if I have the maker pre shrink the fabric (i.e., two hot washes) before making up the shirts, can I still expect the shrinkage in the sleeve, body length, and various widths, or will that take care of it?